How to Install the Hood Cable for Latch Release on 2007 Chrysler Pacifica?

Put the cable and handle together, attaching both to the car first. After that, pull the hood cable through the hole cut in the dash and slide the rubber grommet into the car's dash panel. Screw the hood release handle to the cowl panel and afterwards, secure the left front cowl trim panel in place. Attach the remote hood cable to the hood latch and seal the remote hood cable clips. After that, install the hood latch, make sure the hood is down and check its proper functioning.

OEM 2007 Chrysler Pacifica Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Cable found

View related parts
2007 Chrysler Pacifica Release Cable, Front Part Number: 4719879AA
Product Specifications
- Other Name: Cable - Hood Latch; Hood Release Cable, Front; Release Hood Latch; Hood Release Cable
- Position: Front
- Item Weight: 0.80 Pounds
- Item Dimensions: 88.2 x 4.0 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4719879AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2007 Chrysler Pacifica Hood Cable Parts and Q&A

Q: How to Install the Hood Cable for Latch Release on 2007 Chrysler Pacifica?
A: Put the cable and handle together, attaching both to the car first. After that, pull the hood cable through the hole cut in the dash and slide the rubber grommet into the car's dash panel. Screw the hood release handle to the cowl panel and afterwards, secure the left front cowl trim panel in place. Attach the remote hood cable to the hood latch and seal the remote hood cable clips. After that, install the hood latch, make sure the hood is down and check its proper functioning.