How to Service and Repair a Wiper Motor on 2008 Chrysler Pacifica?

Always begin your service and repairs on the front wiper motor by disconnecting the battery's negative cable. Following that, take out the wiper module. When the wiper module is out on a bench, separate the socket and ball joint at the end of the bell crank. After that, loosen the three bolts that hold the motor to the front of the car, then take the motor out from the rest of the wiper system.

OEM 2008 Chrysler Pacifica Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2008 Chrysler Pacifica Wiper Motor Part Number: 5102228AA
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Front Motor; Motor Windshield Wiper
- Item Weight: 3.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102228AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Wiper Motor Part Number: 4894283AC
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor
- Replaces: 4894283AB, 4894283AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4894283AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Wiper Motor Parts and Q&A

Q: How to Service and Repair a Wiper Motor on 2008 Chrysler Pacifica?
A: Always begin your service and repairs on the front wiper motor by disconnecting the battery's negative cable. Following that, take out the wiper module. When the wiper module is out on a bench, separate the socket and ball joint at the end of the bell crank. After that, loosen the three bolts that hold the motor to the front of the car, then take the motor out from the rest of the wiper system.