Other Name: Seat Belt - Buckle Half W/Latch 60% Center; Seat Belt Anchor Plate Cover, Rear; Seat Belt Receptacle, Rear Right; Cover; Latch; Seat Belt Buckle Half W/Latch 60% Center
Position: Rear
Replaces: 1DW301KAAA
Item Weight: 3.20 Pounds
Item Dimensions: 10.1 x 3.9 x 2.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 1DW301K2AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
Other Name: Seat Belt - Buckle Half W/Latch 60% Center; Seat Belt Anchor Plate Cover, Rear; Seat Belt Receptacle, Rear Right; Cover; Latch; Seat Belt Buckle Half W/Latch 60% Center With Seat Release Latch; Seat Belt Buckle Half W/Latch 60% Center
Position: Rear
Item Weight: 2.00 Pounds
Item Dimensions: 5.5 x 5.1 x 2.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 1DW301D5AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler PT Cruiser Submodels:
Base, Classic, Couture Edition, GT, LX, Limited, Touring | 4 Cyl 2.4 L GAS
| Page 1 of 2 |Next >
1-20 of 25 Results
2007 Chrysler PT Cruiser Seat Belt Parts and Q&A
Q: How to Properly Install a Seat Belt and Rear Seat Upper Bolster on 2007 Chrysler PT Cruiser?
A: Put the seat belt and retractor in the vehicle, then fasten the one retaining bolt on the retractor to 40 Nm (30 ft. lbs.) of torque. Attach the rear seat upper bolster by running the webbing through its top and fastening it to the four bolts. Following that, add the Lower Quarter Trim Panel and ensure you tighten the lower seat belt anchor nut to 40 Nm (30 ft. lbs.).