How to Remove and Replace a Lash Adjuster on 2007 Chrysler Sebring?

You should start by removing the cylinder head cover, then move on to the camshafts to replace or remove the lifter or lash adjuster. After that, pull out each camshaft lash adjuster (1) using the same steps. If reusing your lash adjusters is part of your plans, label every lash adjuster so they can be put back in place correctly. Be sure to change the camshaft lash adjusters when you replace the cylinder head or the camshafts.

OEM 2007 Chrysler Sebring Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Lash Adjusters found

View related parts
2007 Chrysler Sebring Valve Lifters Part Number: 4884594AB
$4.45 MSRP: $6.70
You Save: $2.25 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve; Valve Lifter; Tappet; Tappet Valve Solid Bucket Tappets Thickness Is Stamped On Inside Of Bucket.; Tappet Valve See Note
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.6 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884594AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2007 Chrysler Sebring Valve Lifters Part Number: 4663985
$37.74 MSRP: $56.00
You Save: $18.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Engine Valve Lifter; Valve Lifter; Adjuster Valve Lash
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.7 x 0.8 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663985
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2007 Chrysler Sebring Lash Adjuster Parts and Q&A

Q: How to Remove and Replace a Lash Adjuster on 2007 Chrysler Sebring?
A: You should start by removing the cylinder head cover, then move on to the camshafts to replace or remove the lifter or lash adjuster. After that, pull out each camshaft lash adjuster (1) using the same steps. If reusing your lash adjusters is part of your plans, label every lash adjuster so they can be put back in place correctly. Be sure to change the camshaft lash adjusters when you replace the cylinder head or the camshafts.