How to Maintain and Fix a Parking Brake Shoe on 2007 Chrysler Sebring?

The first thing is to lift and support the car to access and fix the parking brake shoe. To remove parking brake shoes on both sides, perform the steps on either side as described next. Take out and remove the rear brake rotor (3). Shorten the brake shoe adjuster wheel as much as possible. Take out the upper return spring (1) from both the anchor pin (3) and the rear brake shoe, as well as the upper return spring (2) from the anchor pin (3) and the front brake shoe. After that, use your hand to remove the hold-down springs and pins (1, 2) by turning them 90 degrees. Lift the leather pad at the brake shoe to unhook the parking brake cable from the lever behind it. All of the brake shoes (2 and 6), the adjuster (5) and the lower return spring (3) can be removed as a group from the support plate. If required, get rid of the strut (1) and then slide out the shoes (2, 6) for the lower return spring (3) and adjuster (5) to load into the washing machine.

OEM 2007 Chrysler Sebring Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Shoes found

View related parts
2007 Chrysler Sebring Brake Shoes, Rear Part Number: 5191306AA
$40.59 MSRP: $61.20
You Save: $20.61 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Drum; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes; Shoes; Shoe And Lining Kit Drum; Drum Brake Shoe
- Position: Rear
- Item Weight: 3.70 Pounds
- Item Dimensions: 5.6 x 7.2 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191306AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Chrysler Sebring Parking Brake Shoes, Rear Part Number: 5191215AB
$121.95 MSRP: $187.00
You Save: $65.05 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Shoe And Lining Parking Brake; Parking Brake Shoe
- Position: Rear
- Replaces: 5191215AA
- Item Weight: 3.40 Pounds
- Item Dimensions: 8.8 x 4.7 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191215AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2007 Chrysler Sebring Brake Pads, Front Part Number: 68574695AA
$67.07 MSRP: $101.00
You Save: $33.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Parking Brake Shoe; Brake Shoes; Front Pads
- Position: Front
- Replaces: 5191229AA, 5191244AA, 5191231AA, 68020494AA, 68020494AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68574695AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Parking Brake Shoe Parts and Q&A

Q: How to Maintain and Fix a Parking Brake Shoe on 2007 Chrysler Sebring?
A: The first thing is to lift and support the car to access and fix the parking brake shoe. To remove parking brake shoes on both sides, perform the steps on either side as described next. Take out and remove the rear brake rotor (3). Shorten the brake shoe adjuster wheel as much as possible. Take out the upper return spring (1) from both the anchor pin (3) and the rear brake shoe, as well as the upper return spring (2) from the anchor pin (3) and the front brake shoe. After that, use your hand to remove the hold-down springs and pins (1, 2) by turning them 90 degrees. Lift the leather pad at the brake shoe to unhook the parking brake cable from the lever behind it. All of the brake shoes (2 and 6), the adjuster (5) and the lower return spring (3) can be removed as a group from the support plate. If required, get rid of the strut (1) and then slide out the shoes (2, 6) for the lower return spring (3) and adjuster (5) to load into the washing machine.