How to Install an A/C Clutch on 2007 Chrysler Town & Country?

Installation of compressor clutch to install the dowel pin and fasten the field coil with a new snap ring. Install the pulley and bearing system but make sure it is not damaged. Install the appropriate air gap on shims, fasten bolts, hook up the wiring harness, and reattach the accessory drive belt.

OEM 2007 Chrysler Town & Country A/C Clutch

Air Conditioning Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Clutches found

View related parts
2007 Chrysler Town & Country Pulley Part Number: 5140469AA
$49.81 MSRP: $63.15
You Save: $13.34 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley Kit - A/C Compressor; A/C Compressor Clutch; Pulley Hub Kit A/C Compressor
- Item Weight: 3.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5140469AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Town & Country Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2007 Chrysler Town & Country Clutch Kit Part Number: 5066225AA
Product Specifications
- Other Name: Clutch Kit - A/C Compressor; A/C Compressor Clutch; Repair Kit; Hardware Kit; Clutch; Clutch Overhaul Kit A/C Compressor
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.4 x 1.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5066225AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2007 Chrysler Town & Country A/C Clutch Parts and Q&A

Q: How to Install an A/C Clutch on 2007 Chrysler Town & Country?
A: Installation of compressor clutch to install the dowel pin and fasten the field coil with a new snap ring. Install the pulley and bearing system but make sure it is not damaged. Install the appropriate air gap on shims, fasten bolts, hook up the wiring harness, and reattach the accessory drive belt.