How to Service and Repair the ABS Control Module on 2007 Dodge Charger?

To repair the Electronic Brake Control Module, disconnect the negative battery cable. Release the ABM harness connector cover, then pull the connector from the module. Unclip brake tubes from routing clips, lift the ICU, and remove the four screws attaching the ABM to the HCU before sliding it off.

OEM 2007 Dodge Charger ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 ABS Control Modules found

View related parts
2007 Dodge Charger Control Module Part Number: 68003539AB
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.3 x 7.3 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003539AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Base, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Charger Modulator Part Number: 68002339AA
Product Specifications
- Other Name: Control - Anti-Lock Brake System; ABS Modulator Valve; ABS Control Module; Hydraulic Control Unit Anti-Lock Brake System
- Item Weight: 4.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68002339AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Charger Submodels:
- Base, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Charger Control Module Part Number: 5134111AA
Product Specifications
- Other Name: Master Cylinder - Anti-Lock Brake System; ABS Modulator Valve; ABS Control Module; Modulator Valve; Modulator; Hydraulic Control Unit Anti-Lock Brake System
- Item Weight: 6.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5134111AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Charger Control Module Part Number: 5159192AC
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Modulator Valve; ABS Control Module; Modulator; Module Anti-Lock Brake System
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5159192AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Charger Control Module Part Number: 68002341AB
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module
- Replaces: 68002341AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.1 x 7.1 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68002341AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Base, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Charger Modulator Part Number: 68004546AA
Product Specifications
- Other Name: Master Cylinder - Anti-Lock Brake System; ABS Modulator Valve; ABS Control Module; Hydraulic Control Unit Anti-Lock Brake System
- Replaces: 5175605AA
- Item Weight: 5.10 Pounds
- Item Dimensions: 7.4 x 6.0 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68004546AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Base, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Charger Control Module Part Number: 5191296AA
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Modulator Valve; ABS Control Module; Modulator; Module Anti-Lock Brake System
- Replaces: 5159193AA
- Item Weight: 2.10 Pounds
- Item Dimensions: 7.1 x 6.9 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191296AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Charger Control Module Part Number: 5134113AA
Product Specifications
- Other Name: Master Cylinder - Anti-Lock Brake System; ABS Modulator Valve; ABS Control Module; Modulator Valve; Modulator; Hydraulic Control Unit Anti-Lock Brake System
- Item Weight: 7.30 Pounds
- Item Dimensions: 6.9 x 7.2 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5134113AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Charger Control Module Part Number: 5136134AC
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module; Module Anti-Lock Brake System
- Item Weight: 2.10 Pounds
- Item Dimensions: 7.1 x 7.1 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5136134AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS

2007 Dodge Charger ABS Control Module Parts and Q&A

Q: How to Service and Repair the ABS Control Module on 2007 Dodge Charger?
A: To repair the Electronic Brake Control Module, disconnect the negative battery cable. Release the ABM harness connector cover, then pull the connector from the module. Unclip brake tubes from routing clips, lift the ICU, and remove the four screws attaching the ABM to the HCU before sliding it off.