How to Remove the Parking Brake Shoe from Each Side on 2007 Dodge Charger?

Before removing the parking brake shoes, lift and support the vehicle and then remove the rear hub and bearing. Disengage the parking brake shoe entirely and remove the adjuster spring (3) and shoe (8). After that, disconnect the upper hold-down clip (7), pin (8) and upper brake shoe (6) from the return spring (4) and brake actuator lever (1). Take the return spring (4) off the bottom of the shoe (6), then remove the shoe actuator lever (1) from the cable (2). Following that, remove the brake shoe lower hold-down pin (7) and clip together. Then, lift the lower brake shoe (6) out of the caliper. It's also important to check the springs, adjuster, lever and aluminum shoe anchor pin for signs of wear or damage, so that any worn components can be changed.

OEM 2007 Dodge Charger Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Brake Shoe found

View related parts
2007 Dodge Charger Parking Brake Shoes, Rear Part Number: 68020626AB
$90.76 MSRP: $136.00
You Save: $45.24 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Parking Brake Shoe
- Position: Rear
- Replaces: 5137624AA, 68020626AA, 68020626AC, 5103204AA
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.1 x 6.0 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020626AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Base, Daytona, Daytona 392, Daytona R/T, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2007 Dodge Charger Parking Brake Shoe Parts and Q&A

Q: How to Remove the Parking Brake Shoe from Each Side on 2007 Dodge Charger?
A: Before removing the parking brake shoes, lift and support the vehicle and then remove the rear hub and bearing. Disengage the parking brake shoe entirely and remove the adjuster spring (3) and shoe (8). After that, disconnect the upper hold-down clip (7), pin (8) and upper brake shoe (6) from the return spring (4) and brake actuator lever (1). Take the return spring (4) off the bottom of the shoe (6), then remove the shoe actuator lever (1) from the cable (2). Following that, remove the brake shoe lower hold-down pin (7) and clip together. Then, lift the lower brake shoe (6) out of the caliper. It's also important to check the springs, adjuster, lever and aluminum shoe anchor pin for signs of wear or damage, so that any worn components can be changed.