How to Maintain the Coolant Temperature Sensor on a 3.7L Engine on 2007 Dodge Dakota?

To service the ECT (Engine Coolant Temperature) sensor on the 3.7L engine, it is in the water jacket in the front of the intake manifold behind the generator and to prevent injury from hot, pressurized coolant, partial drain the cooling system. Last, move on to remove the sensor from the intake manifold after removing the electrical connector from the sensor.

OEM 2007 Dodge Dakota Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2007 Dodge Dakota Coolant Temperature Sensor Part Number: 56027873
$90.13 MSRP: $125.00
You Save: $34.87 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Cooling Fan Temperature Switch; Temperature Sensor; Fan Switch; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.1 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027873
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2007 Dodge Dakota Coolant Temperature Sensor Parts and Q&A

Q: How to Maintain the Coolant Temperature Sensor on a 3.7L Engine on 2007 Dodge Dakota?
A: To service the ECT (Engine Coolant Temperature) sensor on the 3.7L engine, it is in the water jacket in the front of the intake manifold behind the generator and to prevent injury from hot, pressurized coolant, partial drain the cooling system. Last, move on to remove the sensor from the intake manifold after removing the electrical connector from the sensor.