How to Install an Oil Pressure Switch on 2007 Dodge Dakota?

Begin by installing the oil pressure sender, followed by connecting its wire. Then, attach the front splash shield and lower the vehicle. Lastly, reconnect the negative battery cable.

OEM 2007 Dodge Dakota Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2007 Dodge Dakota Oil Pressure Sending Unit Part Number: 4868672AA
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Oil Pressure Switch; Switch Oil Pressure
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 1.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4868672AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2007 Dodge Dakota Oil Pressure Switch Parts and Q&A

Q: How to Install an Oil Pressure Switch on 2007 Dodge Dakota?
A: Begin by installing the oil pressure sender, followed by connecting its wire. Then, attach the front splash shield and lower the vehicle. Lastly, reconnect the negative battery cable.