How to Install a Speed Sensor for Wheels on 2007 Dodge Dakota?

First, put the wires in the clips and connect the electrical connector. The next part is to insert the wheel speed sensor into the hub. Put the mounting bolt through the hub to lock the wheel speed sensor in position and tighten it until you reach 21 Nm (190 in. lbs.). After that, replace the front rotor and brake caliper assembly.

OEM 2007 Dodge Dakota Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Speed Sensors found

View related parts
2007 Dodge Dakota Speed Sensor, Rear Part Number: 5032220AC
Product Specifications
- Other Name: Sensor - Wheel Speed; Rear ABS Wheel Speed Sensor; Anti-Lock Braking System.; Rear Speed Sensor
- Position: Rear
- Replaced by: 5032220AD
- Replaces: 5032220AA, 5032220AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5032220AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Dodge Dakota Sensor - Wheel Speed Part Number: 5032220AD
Product Specifications
- Other Name: SENSOR-WHEEL SPEED
- SKU: 5032220AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2007 Dodge Dakota Speed Sensor Parts and Q&A

Q: How to Install a Speed Sensor for Wheels on 2007 Dodge Dakota?
A: First, put the wires in the clips and connect the electrical connector. The next part is to insert the wheel speed sensor into the hub. Put the mounting bolt through the hub to lock the wheel speed sensor in position and tighten it until you reach 21 Nm (190 in. lbs.). After that, replace the front rotor and brake caliper assembly.