How to Maintain a Front Wheel Speed Sensor on 2006 Dodge Dakota?

Raise and support the vehicle first and next take out the front rotor and caliper adapter. After that, unscrew and remove the wheel speed sensor mounting bolt (1) from the hub (3), then remove the wheel speed sensor (2). Remove the wires from their clips and separate the electrical connector from the fuses (1). Place the wires onto the installed clips and attach the electrical connector (1). Attach the wheel speed sensor (2) to the hub (3) and use bolt (1) to tighten it with a nut to 21 Nm (190 inch lbs.). After that, install the removed front rotor and the brake caliper assembly.

OEM 2006 Dodge Dakota Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Speed Sensors found

View related parts
2006 Dodge Dakota Speed Sensor, Rear Part Number: 5032220AC
Product Specifications
- Other Name: Sensor - Wheel Speed; Rear ABS Wheel Speed Sensor; Anti-Lock Braking System.; Rear Speed Sensor
- Position: Rear
- Replaced by: 5032220AD
- Replaces: 5032220AA, 5032220AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5032220AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Dakota Sensor - Wheel Speed Part Number: 5032220AD
Product Specifications
- Other Name: SENSOR-WHEEL SPEED
- SKU: 5032220AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2006 Dodge Dakota Speed Sensor Parts and Q&A

Q: How to Maintain a Front Wheel Speed Sensor on 2006 Dodge Dakota?
A: Raise and support the vehicle first and next take out the front rotor and caliper adapter. After that, unscrew and remove the wheel speed sensor mounting bolt (1) from the hub (3), then remove the wheel speed sensor (2). Remove the wires from their clips and separate the electrical connector from the fuses (1). Place the wires onto the installed clips and attach the electrical connector (1). Attach the wheel speed sensor (2) to the hub (3) and use bolt (1) to tighten it with a nut to 21 Nm (190 inch lbs.). After that, install the removed front rotor and the brake caliper assembly.