What is the correct method for installing a Wiper Arm on 2007 Dodge Dakota?

Before setting up the wiper arms, place the wiper motor in park by using the On setting on the ignition switch and turning the multi-function control knob to Off. Allow the wiper blades to completely stop and after that, turn the ignition to Off. It is important to index the wiper arms to the pivot shafts with the blade motor turned off. Put the wiper arm pivot end over the pivot at the same time as lowering the wiper blade edge and matching it with the wiper alignment lines in the upper margin of the lower windshield tinted zone. Take your hand and release some pressure from the wiper spring by lifting the arm slightly outwards, then push the arm down over the shaft. Place a breaker bar on the nut and tighten it to 24 Nm (18 ft. lbs.). Wet the windshield, activate the wipers, switch the wiper to Off and make sure the arm returns to its correct position. Finally, replace the plastic nut cap on top of the pivot nut.

OEM 2007 Dodge Dakota Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wiper Arms found

View related parts
2007 Dodge Dakota Wiper Arm, Driver Side Part Number: 55154897AD
$74.89 MSRP: $98.70
You Save: $23.81 (25%)
ADD TO CART
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Wiper
- Position: Driver Side
- Replaces: 55154897AB, 55154897AC
- Item Weight: 1.30 Pounds
- Item Dimensions: 21.6 x 3.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55154897AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2007 Dodge Dakota Wiper Arm, Front Passenger Side Part Number: 55154854AF
$71.19 MSRP: $107.00
You Save: $35.81 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Wiper - Front Wiper; Windshield Wiper Arm, Left, Right; Front Arm; Arm Front Wiper; Arm Wiper
- Position: Front Passenger Side
- Replaces: 55154854AB, 55154854AE
- Item Weight: 1.30 Pounds
- Item Dimensions: 24.2 x 3.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55154854AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2007 Dodge Dakota Wiper Arm Part Number: WBFLAT03AA
$7.36 MSRP: $9.34
You Save: $1.98 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade - Wiper
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: WBFLAT03AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Dakota Submodels:
- Laramie, SLT, ST | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Dodge Dakota Wiper Motor Part Number: 55154863AI
Product Specifications
- Other Name: Pivot - Windshield Wiper; Windshield Wiper Motor; Motor & Linkage; Front Motor; Motor And Linkage Windshield Wiper
- Replaces: 55154863AC, 55154863AE, 55154863AH, 55154863AG, 55154863AF, 55154863AD
- Item Weight: 7.50 Pounds
- Item Dimensions: 30.2 x 6.2 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55154863AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 3.7L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2007 Dodge Dakota Wiper Arm Parts and Q&A

Q: What is the correct method for installing a Wiper Arm on 2007 Dodge Dakota?
A: Before setting up the wiper arms, place the wiper motor in park by using the On setting on the ignition switch and turning the multi-function control knob to Off. Allow the wiper blades to completely stop and after that, turn the ignition to Off. It is important to index the wiper arms to the pivot shafts with the blade motor turned off. Put the wiper arm pivot end over the pivot at the same time as lowering the wiper blade edge and matching it with the wiper alignment lines in the upper margin of the lower windshield tinted zone. Take your hand and release some pressure from the wiper spring by lifting the arm slightly outwards, then push the arm down over the shaft. Place a breaker bar on the nut and tighten it to 24 Nm (18 ft. lbs.). Wet the windshield, activate the wipers, switch the wiper to Off and make sure the arm returns to its correct position. Finally, replace the plastic nut cap on top of the pivot nut.