How to Remove and Install a Wiper Arm on 2006 Dodge Dakota?

To take out the wiper arm, first reach over it and move it back and to the left, narrowing the angle between the arms, to hold the wiper blade away from the windscreen. Use care and pry off the plastic nut cap from the pivot end of the wiper arm before unfastening the nut that holds the wiper arm in place. If this step is needed, pull the wiper arm off the pivot shaft using a appropriate battery terminal puller, then remove the wiper arm pivot pin. While installing, turn the ignition on and set the multi-function switch to Off to make sure the wiper motor is park position. Let the wiper pivots stop and then switch off the car. Insert the wiper pivot end into the pivot shaft, with the wiper arm, facing up, so that the lower edge of the blade is in line with the lines along the top of the black area under the lower windshield. Release tension on the pivot spring by lifting the arm a little and pushing the arm down over the pivot point. The nut attaching the wiper arm to the pivot shaft should be tightened to 24 N.m or 18 ft. lbs. Wet the windshield, run the wipers, switch the wiper to Off and make sure the wipers are pulled back into position. Simply replace the plastic cap onto the wiper arm pivot nut.

OEM 2006 Dodge Dakota Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wiper Arms found

View related parts
2006 Dodge Dakota Wiper Arm, Driver Side Part Number: 55154897AD
$74.89 MSRP: $98.70
You Save: $23.81 (25%)
ADD TO CART
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Wiper
- Position: Driver Side
- Replaces: 55154897AB, 55154897AC
- Item Weight: 1.30 Pounds
- Item Dimensions: 21.6 x 3.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55154897AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Dakota Wiper Arm, Front Passenger Side Part Number: 55154854AF
$71.19 MSRP: $107.00
You Save: $35.81 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Wiper - Front Wiper; Windshield Wiper Arm, Left, Right; Front Arm; Arm Front Wiper; Arm Wiper
- Position: Front Passenger Side
- Replaces: 55154854AB, 55154854AE
- Item Weight: 1.30 Pounds
- Item Dimensions: 24.2 x 3.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55154854AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 3.7L V6, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Dakota Wiper Arm Part Number: WBFLAT03AA
$7.36 MSRP: $9.34
You Save: $1.98 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade - Wiper
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: WBFLAT03AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Dakota Submodels:
- Laramie, SLT, ST | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2006 Dodge Dakota Wiper Motor Part Number: 55154863AI
Product Specifications
- Other Name: Pivot - Windshield Wiper; Windshield Wiper Motor; Motor & Linkage; Front Motor; Motor And Linkage Windshield Wiper
- Replaces: 55154863AC, 55154863AE, 55154863AH, 55154863AG, 55154863AF, 55154863AD
- Item Weight: 7.50 Pounds
- Item Dimensions: 30.2 x 6.2 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55154863AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 3.7L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2006 Dodge Dakota Wiper Arm Parts and Q&A

Q: How to Remove and Install a Wiper Arm on 2006 Dodge Dakota?
A: To take out the wiper arm, first reach over it and move it back and to the left, narrowing the angle between the arms, to hold the wiper blade away from the windscreen. Use care and pry off the plastic nut cap from the pivot end of the wiper arm before unfastening the nut that holds the wiper arm in place. If this step is needed, pull the wiper arm off the pivot shaft using a appropriate battery terminal puller, then remove the wiper arm pivot pin. While installing, turn the ignition on and set the multi-function switch to Off to make sure the wiper motor is park position. Let the wiper pivots stop and then switch off the car. Insert the wiper pivot end into the pivot shaft, with the wiper arm, facing up, so that the lower edge of the blade is in line with the lines along the top of the black area under the lower windshield. Release tension on the pivot spring by lifting the arm a little and pushing the arm down over the pivot point. The nut attaching the wiper arm to the pivot shaft should be tightened to 24 N.m or 18 ft. lbs. Wet the windshield, run the wipers, switch the wiper to Off and make sure the wipers are pulled back into position. Simply replace the plastic cap onto the wiper arm pivot nut.