How to Service a Wiper Motor on 2007 Dodge Dakota?

Before servicing the wiper motor, first remove the wiper arms from their pivots. After that, unlatch and raise the hood and disconnect the battery negative cable. After that, lift off the cowl plenum cover/grille panel so you can remove the four screws that keep the wiper module in place. After disconnecting the headlamp and dash wire harness, remove the wiper motor pigtail wire connector and take the whole wiper module out of its panel on the cowl plenum.

OEM 2007 Dodge Dakota Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2007 Dodge Dakota Wiper Motor Part Number: 55154863AI
Product Specifications
- Other Name: Pivot - Windshield Wiper; Windshield Wiper Motor; Motor & Linkage; Front Motor; Motor And Linkage Windshield Wiper
- Replaces: 55154863AC, 55154863AE, 55154863AH, 55154863AG, 55154863AF, 55154863AD
- Item Weight: 7.50 Pounds
- Item Dimensions: 30.2 x 6.2 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55154863AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 3.7L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2007 Dodge Dakota Wiper Motor Parts and Q&A

Q: How to Service a Wiper Motor on 2007 Dodge Dakota?
A: Before servicing the wiper motor, first remove the wiper arms from their pivots. After that, unlatch and raise the hood and disconnect the battery negative cable. After that, lift off the cowl plenum cover/grille panel so you can remove the four screws that keep the wiper module in place. After disconnecting the headlamp and dash wire harness, remove the wiper motor pigtail wire connector and take the whole wiper module out of its panel on the cowl plenum.