How to Remove the ABS Control Module on 2008 Dodge Durango?

The left front tire and wheel assembly must first be removed in order to remove Electronic Brake Control Module. Second, remove the ABM module electrical connector. Next remove the two module mounting screws. Slowly take the module off the HCU and take care not to break the pressure sensor or touch the sensor terminals of the HCU side or the contact pads of the ABM side during this removal.

OEM 2008 Dodge Durango ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2008 Dodge Durango Control Module Part Number: 68025874AB
Product Specifications
- Other Name: Module - ABS; ABS Control Module; Module; Module Anti-Lock Brakes
- Replaces: 68025874AA
- Item Weight: 0.90 Pounds
- Item Dimensions: 17.3 x 9.2 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68025874AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Modulator Valve Part Number: 68025873AB
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; Modulator; Control Unit Anti-Lock Brake
- Replaces: 68025873AA
- Item Weight: 5.90 Pounds
- Item Dimensions: 4.0 x 3.0 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68025873AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Dodge Durango ABS Control Module Parts and Q&A

Q: How to Remove the ABS Control Module on 2008 Dodge Durango?
A: The left front tire and wheel assembly must first be removed in order to remove Electronic Brake Control Module. Second, remove the ABM module electrical connector. Next remove the two module mounting screws. Slowly take the module off the HCU and take care not to break the pressure sensor or touch the sensor terminals of the HCU side or the contact pads of the ABM side during this removal.