Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door Actuator, Rear; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator A/C And Heater Serviced With Distribution Housing; Actuator A/C And Heater
Position: Rear
Item Weight: 0.60 Pounds
Item Dimensions: 2.0 x 3.1 x 3.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5061099AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Grand Caravan Submodels:
Base, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
2007 Dodge Grand Caravan Blend Door Actuator Parts and Q&A
Q: How to Install a Blend Door Actuator on the HVAC Air Distribution Housing on 2007 Dodge Grand Caravan?
A: Position the mode door actuator where it should be and twist it a bit if needed to make sure the actuator's splines fit into those in the mode door linkage. Fill the holes in the actuator using two 2 Nm (17 inch-pounds) screws and connecting them to the air distribution housing. After linking the wire harness connector to the mode door actuator, put the silencer under the driver side of the instrument panel. Last, put the negative battery cable back and calibrate the A/C-heater control.