How to Install an HVAC Pressure Switch on 2007 Dodge Grand Caravan?

Use only the particular O-ring made for R-134a and the right refrigerant oil for the A/C compressor when installing the Refrigerant Pressure Sensor / Switch. Rub a new rubber O-ring seal with clean refrigerant oil and place it on the liquid line fitting. After that, connect the HVAC pressure switch to the liquid line and check that it is secured properly. After you have matched the wire harness cable to the HVAC pressure switch, go ahead and restart the negative cable link to the battery.

OEM 2007 Dodge Grand Caravan HVAC Pressure Switch

Air Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 HVAC Pressure Switch found

View related parts
2007 Dodge Grand Caravan Pressure Switch Part Number: 5174039AB
$118.97 MSRP: $175.00
You Save: $56.03 (33%)
Product Specifications
- Other Name: Valve - A/C Pressure Transducer; Refrigerant, HVAC, Compressor, Trinary Switches; Pressure Transducer; Includes O-Ring and Item #4; Discharge Line Valve.
- Replaces: 5175684AA, 5189363AA, 5096084AA, 5174039AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.1 x 1.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5174039AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Grand Caravan Submodels:
- Anniversary Edition, Base, C/V, Crew, EL, ES, EX, Express, LE, Mainstreet, R/T, SE, SE Plus, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Grand Caravan HVAC Pressure Switch Parts and Q&A

Q: How to Install an HVAC Pressure Switch on 2007 Dodge Grand Caravan?
A: Use only the particular O-ring made for R-134a and the right refrigerant oil for the A/C compressor when installing the Refrigerant Pressure Sensor / Switch. Rub a new rubber O-ring seal with clean refrigerant oil and place it on the liquid line fitting. After that, connect the HVAC pressure switch to the liquid line and check that it is secured properly. After you have matched the wire harness cable to the HVAC pressure switch, go ahead and restart the negative cable link to the battery.