Other Name: Grille - Radiator; Grille, Front; Grille Radiator
Position: Front
Item Weight: 16.80 Pounds
Item Dimensions: 64.9 x 18.0 x 14.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 1EY991B5AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
R/T, SLT, SXT | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
2007 Dodge Nitro Grille Parts and Q&A
Q: How is the Grille Installed on 2007 Dodge Nitro?
A: The grille is installed by starting with the front lamp units attached to both sides. After that, attach the grille, then connect the cables from the front lamp, side marker lamp and turn signal lamp. Push the lower section of the grille down until you hear the fasteners attach evenly on both sides. Following that, move the grille's sides until the fasteners click into place. First put in the push pins (1) into the grille and then insert the torx screw (2) on the left side to attach the grille to the fender. Secure the left side of the grille to the radiator's support with torx screws (1) first and then do the same for the right side by installing screws (2) on the grille and fender and screws (1) to the right side and support. Make sure to bring the hood down.