OEM 2007 Dodge Nitro Windshield

2007 Dodge Nitro Windshield Parts and Q&A

• Q: How to Safely Detach a Windshield on 2007 Dodge Nitro?

  A: Before removing the windshield, check and read all warnings. At first, you should take out the rear view mirror and the arms of the wipers. Then, remove the hood seal (3) and carefully use a trim stick C-4755 or an equivalent stick to drive the cover assembly away from the A-pillar. Untie the four push pins (2) and undo the cowl grille (1) that is attached to the body (4). Again, guide your trim stick to position C-4755 or its equivalent. Take out the push pin (1). After that, detach the windshield A-pillar molding (2) and the attached clips (3). Gently slice open the urethane seal with a sharp cold knife or, if access to a pneumatic cutter is available, use that and finally clean out the area around the windshield before removing it.