How to Service and Repair an Ignition Coil for a 5.7L Engine on 2007 Dodge Ram 3500?

Make sure to use compressed air to remove any dirt or debris first, around the top part of the spark plug, for the ignition coil of the 5.7L engine. Before placing the coil, grease the dielectric on every spark plug boot. Put the ignition coil into the valve cover and push it against the spark plugs. Attach the two coil mounting bolts and tighten them until the torque value is 7 Nm (62 in.lbs.). At last, combine the electrical connector with the coil by simply snapping them together.

OEM 2007 Dodge Ram 3500 Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2007 Dodge Ram 3500 Ignition Coil Part Number: 68238603AA
$104.52 MSRP: $144.00
You Save: $39.48 (28%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Replaces: 56029129AA, 56029129AF, 56029129AB, 68060346AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 3.5 x 6.5 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68238603AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport | 5.7L V8, 8 Cyl 5.7 L GAS

2007 Dodge Ram 3500 Ignition Coil Parts and Q&A

Q: How to Service and Repair an Ignition Coil for a 5.7L Engine on 2007 Dodge Ram 3500?
A: Make sure to use compressed air to remove any dirt or debris first, around the top part of the spark plug, for the ignition coil of the 5.7L engine. Before placing the coil, grease the dielectric on every spark plug boot. Put the ignition coil into the valve cover and push it against the spark plugs. Attach the two coil mounting bolts and tighten them until the torque value is 7 Nm (62 in.lbs.). At last, combine the electrical connector with the coil by simply snapping them together.