How to Remove the Front Lower Control Arm on Jeep Commander?

To remove the front lower control arm raise and support the vehicle and remove the tire and wheel assembly. Then, separate the steering knuckle (3); afterwards remove the shock clevis bracket (3) from the lower control arm. Next remove the nut and bolt from the front of the lower control arm then proceed to disconnect the stabilizer link (2) at the lower control arm. Remove lower control arm (1), its rear bolts (2) and flag nuts (3) from the lower control arm before finally removing the lower control arm from the vehicle.

How to Install the Control Arm on Jeep Commander?

Position the lower control arm into the cradle and fasten it to the frame by tightening both rear bolts and flag nuts to 88 Nm (65 ft lbs). After that, set the nut and bolt at the front of the lower control arm and tighten them to 169 Nm (125 ft lbs) to ensure the flag bolt with the flag and head are on the forward side. Secure the lower clevis bolt in the lower control arm and tighten to 169 Nm (125 ft lbs). Then, install the stabilizer link and tighten that to 115 Nm (85 ft lbs). Attach the steering knuckle to the upper ball joint and tighten the nut until you reach 95 Nm (70 ft lbs). Install the installed tire and wheel assembly, lift up the vehicle and complete a wheel alignment.

OEM Jeep Commander Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Control Arms found

View related parts
Jeep Commander Upper Control Arm, Front Part Number: 52090206AI
$300.25 MSRP: $447.00
You Save: $146.75 (33%)
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Front Upper Suspension Control Arm and Ball Joint Assembly.; Arm Upper Control Front; Control Arm
- Position: Front Upper
- Replaces: 52090206AD, 52090206AG, 52090206AE, 52090206AH, 52090206AC, 52090206AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lower Control Arm, Front Driver Side Part Number: 52089981AI
$649.74 MSRP: $987.00
You Save: $337.26 (35%)
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Front Left Suspension Control Arm and Ball Joint Assembly; Control Arm Bushing.; Arm Lower Control Front; Control Arm
- Position: Front Lower Driver Side
- Replaces: 52089981AD, 52089981AG, 52089981AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lower Control Arm, Front Passenger Side Part Number: 52089980AI
$649.74 MSRP: $987.00
You Save: $337.26 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Front Right Suspension Control Arm and Ball Joint Assembly.; Arm Lower Control Front; Control Arm
- Position: Front Lower Passenger Side
- Replaces: 52089980AG, 52089980AD, 52089980AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Upper Control Arm, Rear Part Number: 52089629AC
$113.73 MSRP: $173.00
You Save: $59.27 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Suspension Control Arm, Rear Upper; Arm Upper Control Rear; Suspension Control Arm; Control Arm
- Position: Rear Upper
- Replaces: 52089629AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Lower Control Arm, Rear Part Number: 52089630AC
$98.69 MSRP: $217.00
You Save: $118.31 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm, Rear Lower; Arm Lower Control Rear; Suspension Control Arm; Control Arm
- Position: Rear Lower
- Replaces: 52089630AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Upper Control Arm Part Number: 68005174AC
Product Specifications
- Other Name: Arm - Upper Control; Control Arm; Arm Upper Control Rear
- Position: Upper
- Replaces: 68005174AA, 68005174AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Control Arm

Choose OEM Control Arm that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Control Arm follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Control Arm is one of the critical parts that plays a very important role of improving the performances as well as the durability of Jeep Commander vehicles. Connecting the car's frame and the wheels, the Control Arm lets the suspension move in a way that allows the wheels to handle the bumps of the road. This functionality is critical in the adjustment of the JK's wheel alignment which has crucial ramifications to the vehicle's safety and maneuverability of the Jeep Commander. Models of the Jeep Commander like the XK and the 2022 Meridian have different types of Control Arm and they range from the stamped steel and advanced cast aluminum types that are stronger and lighter. Control Arm is designed specifically for the Jeep vehicles to meet all the daily usage and other harsh road conditions with optimal components and materials, upgraded bushings increase the control of the vehicle. This in a way enhances more not only on the efficiency of Jeep Commander but also the general safety of the car when on the road. Also, linking to the fact of matching to the numerous types of the Commander model, the Control Arm plays a crucial role among other car options in the Jeep, thus becoming one of the most advantageous and unique bonuses in the automotive industry. The Control Arm has been known to guarantee its consumers satisfactory results, pledge a consistent result on performance, and make sure that each ride in the Jeep Commander is as comfortable and safe as it can be.

Jeep Commander Control Arm Parts and Q&A

Lower Control Arm, Front Driver Side
52089981AI
Q: How to Remove the Front Lower Control Arm on Jeep Commander?
A:
To remove the front lower control arm raise and support the vehicle and remove the tire and wheel assembly. Then, separate the Steering Knuckle (3); afterwards remove the shock clevis bracket (3) from the lower control arm. Next remove the nut and bolt from the front of the lower control arm then proceed to disconnect the stabilizer link (2) at the lower control arm. Remove lower control arm (1), its rear bolts (2) and flag nuts (3) from the lower control arm before finally removing the lower control arm from the vehicle.
Upper Control Arm, Front
52090206AI
Q: How to Install the Control Arm on Jeep Commander?
A:
Position the lower control arm into the cradle and fasten it to the frame by tightening both rear bolts and flag nuts to 88 Nm (65 ft lbs). After that, set the nut and bolt at the front of the lower control arm and tighten them to 169 Nm (125 ft lbs) to ensure the flag bolt with the flag and head are on the forward side. Secure the lower clevis bolt in the lower control arm and tighten to 169 Nm (125 ft lbs). Then, install the stabilizer link and tighten that to 115 Nm (85 ft lbs). Attach the Steering Knuckle to the upper Ball Joint and tighten the nut until you reach 95 Nm (70 ft lbs). Install the installed tire and wheel assembly, lift up the vehicle and complete a wheel alignment.