How to Remove and Replace a Crankshaft Seal on 2007 Jeep Commander?

If the procedure takes place in the vehicle, remove the transmission first and then the flexplate before service and repair of the crankshaft main bearing seal. A used crankshaft oil seal (1) cannot be reused after it has been taken off the engine. The crankshaft rear oil seal remover Special Tool 8506 (2) must be inserted into the seal as far as it will go and tightened to its limit; failing to do either may cause the seal to remain in the engine or the tool to come loose and stop working. Removing the crankshaft rear oil seal with Special Tool 8506 (2) is the last step.

OEM 2007 Jeep Commander Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
2007 Jeep Commander Oil Seal, Front Part Number: 53021313AA
$10.10 MSRP: $14.85
You Save: $4.75 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.6 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Jeep Commander Oil Seal, Front Part Number: 53021585AD
$24.52 MSRP: $36.25
You Save: $11.73 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Front Engine Crankshaft Seal; Timing Cover Seal; Gasket; Crankshaft Seal; Front Seal included with Long Block Engine Install Kit.
- Position: Front
- Replaces: 53021585AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021585AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Limited, Overland, Sport | 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Rear Main Seal Part Number: 53020788AB
$32.91 MSRP: $48.75
You Save: $15.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Seal Crankshaft Bearing Oil; Seal Crankshaft Oil Rear; Engine Crankshaft Seal
- Position: Rear
- Replaces: 68045792AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.0 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020788AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Jeep Commander Rear Main Seal Part Number: 53021335AE
$94.83 MSRP: $142.00
You Save: $47.17 (34%)
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal, Rear; Rear Main Seal Retainer; Crankshaft Rear Oil Seal not included with Long Block Engine Install Kit.
- Position: Rear
- Replaces: 53021335AD, 53021338AB, 68017721AA, 53021335BA, 53021335AC, 68060342AA, 5140028AA
- Item Weight: 3.10 Pounds
- Item Dimensions: 1.3 x 10.2 x 14.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021335AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Limited, Overland, Sport | 5.7L V8, 8 Cyl 5.7 L GAS

2007 Jeep Commander Crankshaft Seal Parts and Q&A

Q: How to Remove and Replace a Crankshaft Seal on 2007 Jeep Commander?
A: If the procedure takes place in the vehicle, remove the transmission first and then the flexplate before service and repair of the crankshaft main bearing seal. A used crankshaft oil seal (1) cannot be reused after it has been taken off the engine. The crankshaft rear oil seal remover Special Tool 8506 (2) must be inserted into the seal as far as it will go and tightened to its limit; failing to do either may cause the seal to remain in the engine or the tool to come loose and stop working. Removing the crankshaft rear oil seal with Special Tool 8506 (2) is the last step.