How to Service a Dimmer Switch on 2007 Jeep Commander?

To access the combination switch, you should set the supplemental restraint system to standby by disconnecting and separating the negative battery cable and waiting for two minutes. After that, take off both the upper and lower shrouds from above and below the steering column. Subsequently, open the panel by taking out the screws on the left multi-function switch (1) from the two locating tabs (3) on the left side of the Steering Control Module (SCM) (2). Pull the switch out from the back of the SCM as far as it will go, then lift it out from the SCM.

OEM 2007 Jeep Commander Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Dimmer Switches found

View related parts
2007 Jeep Commander Turn Signal Switch Part Number: 5143313AF
$147.11 MSRP: $221.00
You Save: $73.89 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5143313AC, 5143313AE, 5143313AB, 5143313AD
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 3.6 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143313AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Turn Signal Switch Part Number: 5143312AF
$160.59 MSRP: $243.00
You Save: $82.41 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5143312AE, 5143312AD, 5143312AC, 5143312AB
- Item Weight: 1.00 Pounds
- Item Dimensions: 11.1 x 4.8 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143312AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Turn Signal Switch Part Number: 5143311AF
$160.59 MSRP: $243.00
You Save: $82.41 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch Housing.; Headlamp Switch
- Replaces: 5143311AE, 5143311AC, 5143311AB, 5143311AD
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.0 x 3.8 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143311AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Dimmer Switch Parts and Q&A

Q: How to Service a Dimmer Switch on 2007 Jeep Commander?
A: To access the combination switch, you should set the supplemental restraint system to standby by disconnecting and separating the negative battery cable and waiting for two minutes. After that, take off both the upper and lower shrouds from above and below the steering column. Subsequently, open the panel by taking out the screws on the left multi-function switch (1) from the two locating tabs (3) on the left side of the Steering Control Module (SCM) (2). Pull the switch out from the back of the SCM as far as it will go, then lift it out from the SCM.