How to Position and Install the Horn Module and Mounting Bracket on 2007 Jeep Commander?

Position the alarm siren module and bracket in the hollow at the right end of the front frame crossmember. Secure it with a screw to 14 Nm. Reconnect the headlamp and dash harness, reinstall the horn, lower the vehicle, reconnect the battery, and configure the new siren with a diagnostic tool.

OEM 2007 Jeep Commander Horn

Alarm Horn

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Horn found

View related parts
2007 Jeep Commander Horn Part Number: 5026994AD
$77.33 MSRP: $116.00
You Save: $38.67 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 5026994AA, 56050166AB, 56050166AC, 5026994AB
- Item Weight: 1.90 Pounds
- Item Dimensions: 5.9 x 7.0 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5026994AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Horn Parts and Q&A

Q: How to Position and Install the Horn Module and Mounting Bracket on 2007 Jeep Commander?
A: Position the alarm siren module and bracket in the hollow at the right end of the front frame crossmember. Secure it with a screw to 14 Nm. Reconnect the headlamp and dash harness, reinstall the horn, lower the vehicle, reconnect the battery, and configure the new siren with a diagnostic tool.