How to Service a Dimmer Switch on the Left Multi-Function Panel on 2006 Jeep Commander?

Before servicing the left multi-function switch on cars with air bags, you should disconnect the negative battery cable, wait two minutes and then isolate it. Unfasten both the upper and lower shroud from the steering column at first, then remove the two screws that attach the left multifunction switch (1) to the left side locating tabs (3) on the SCM (2). Pull the switch toward the back of the SCM to cut power and take it out. Before installing, set the left multi-function switch against the back of the SCM and reconnect its connector. After fitting the switch housing over the two locating tabs on the SCM, add and tighten the two screws to 0.35 N.m (3 in. lbs.). Lastly, put on the upper and lower steering shrouds, then link the negative side of the battery to the cable.

OEM 2006 Jeep Commander Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Dimmer Switches found

View related parts
2006 Jeep Commander Turn Signal Switch Part Number: 5143313AF
$147.11 MSRP: $221.00
You Save: $73.89 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5143313AC, 5143313AE, 5143313AB, 5143313AD
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.2 x 3.6 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143313AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Turn Signal Switch Part Number: 5143312AF
$160.59 MSRP: $243.00
You Save: $82.41 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Multi Purpose Switch; Headlamp Switch; Switch Multifunction
- Replaces: 5143312AE, 5143312AD, 5143312AC, 5143312AB
- Item Weight: 1.00 Pounds
- Item Dimensions: 11.1 x 4.8 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143312AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Turn Signal Switch Part Number: 5143311AF
$160.59 MSRP: $243.00
You Save: $82.41 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch Housing.; Headlamp Switch
- Replaces: 5143311AE, 5143311AC, 5143311AB, 5143311AD
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.0 x 3.8 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143311AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Dimmer Switch Parts and Q&A

Q: How to Service a Dimmer Switch on the Left Multi-Function Panel on 2006 Jeep Commander?
A: Before servicing the left multi-function switch on cars with air bags, you should disconnect the negative battery cable, wait two minutes and then isolate it. Unfasten both the upper and lower shroud from the steering column at first, then remove the two screws that attach the left multifunction switch (1) to the left side locating tabs (3) on the SCM (2). Pull the switch toward the back of the SCM to cut power and take it out. Before installing, set the left multi-function switch against the back of the SCM and reconnect its connector. After fitting the switch housing over the two locating tabs on the SCM, add and tighten the two screws to 0.35 N.m (3 in. lbs.). Lastly, put on the upper and lower steering shrouds, then link the negative side of the battery to the cable.