How to Install the Hood Cable for Latch Release on 2007 Jeep Commander?

Route the hood cable for opening the hood through the cowl panel and then place the grommet in the same place. After that, connect the hood release handle to the cowl trim panel and use the two screws to hold it in place. After that, connect the hood cable between the left inner fender and the crossmember above the radiator and position the three holders for the cable. After that, secure the hood latch in place.

OEM 2007 Jeep Commander Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Cable found

View related parts
2007 Jeep Commander Release Cable, Front Part Number: 55394495AB
$52.20 MSRP: $75.20
You Save: $23.00 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Hood Release; Hood Release Cable, Front; Cable Hood Release; Hood Release Cable
- Position: Front
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.3 x 15.4 x 18.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55394495AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Hood Cable Parts and Q&A

Q: How to Install the Hood Cable for Latch Release on 2007 Jeep Commander?
A: Route the hood cable for opening the hood through the cowl panel and then place the grommet in the same place. After that, connect the hood release handle to the cowl trim panel and use the two screws to hold it in place. After that, connect the hood cable between the left inner fender and the crossmember above the radiator and position the three holders for the cable. After that, secure the hood latch in place.