How to Install a Trunk Lid Latch on 2007 Jeep Commander?

Push the trunk/liftgate latch into the inside of the liftgate and set it according to the marks left by the old latch. Screw in and tighten the three bolts until they reach 12 Nm (9 ft. lbs.). Match the parts of the electrical connector with the latch. Monitor the glass angle and change it if you find it's not aligned properly. Fix the trim piece and then attach the battery negative cable.

OEM 2007 Jeep Commander Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Trunk Lid Latches found

View related parts
2007 Jeep Commander Lock, Rear Part Number: 4589131AA
$151.61 MSRP: $227.00
You Save: $75.39 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate; Liftgate Latch, Rear; Door Lock Actuator Motor; Door Lock Actuator; Trunk Latch; Door Lock; Latch; Latch Lift Gate
- Position: Rear
- Replaced by: 4589131AG
- Item Weight: 1.20 Pounds
- Item Dimensions: 10.5 x 6.4 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4589131AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Lock, Rear Part Number: 55396445AA
$285.22 MSRP: $418.00
You Save: $132.78 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Liftgate Glass; Liftgate Glass Latch, Rear; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Lift Gate Glass
- Position: Rear
- Replaces: 55396445AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.1 x 4.2 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396445AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Trunk Lid Latch Parts and Q&A

Q: How to Install a Trunk Lid Latch on 2007 Jeep Commander?
A: Push the trunk/liftgate latch into the inside of the liftgate and set it according to the marks left by the old latch. Screw in and tighten the three bolts until they reach 12 Nm (9 ft. lbs.). Match the parts of the electrical connector with the latch. Monitor the glass angle and change it if you find it's not aligned properly. Fix the trim piece and then attach the battery negative cable.