Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Jeep Commander Water Pump

H2O Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Water Pumps found

  • 2007 Jeep Commander Water Pump - 53022189AH
    2007 Jeep Commander Water Pump - 53022189AH
    2007 Jeep Commander Water Pump - 53022189AH
    2007 Jeep Commander Water Pump - 53022189AH
    2007 Jeep Commander Water Pump Diagram - 53022189AH
    View related parts

    2007 Jeep Commander Water Pump Part Number: 53022189AH

    $179.01 MSRP: $267.00
    You Save: $87.99 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly
    • Replaces: 53022189AC, 53022189AD, 53022189AF, 5179734AA, 53021187AA, 53022058AA, 53022189AB, 53022189AA, 53022189AG
    • Item Weight: 5.60 Pounds
    • Item Dimensions: 7.7 x 8.3 x 8.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53022189AH
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Jeep Commander Submodels:
    • 65th Anniversary Edition, Base, Limited, Sport | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
  • 2007 Jeep Commander Water Pump - 68670653AA
    2007 Jeep Commander Water Pump Diagram - 68670653AA
    View related parts

    2007 Jeep Commander Pump - Water Part Number: 68670653AA

    $193.66 MSRP: $284.00
    You Save: $90.34 (32%)
    Product Specifications
    • Other Name: PUMP-WATER
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68670653AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2007 Jeep Commander Submodels:
    • Limited, Overland | 5.7L V8, 8 Cyl 5.7 L GAS

2007 Jeep Commander Water Pump Parts and Q&A

  • Q: How to Remove and Replace a Water Pump on a 3.7L Engine on 2007 Jeep Commander?
    A: Make sure to first clean the gasket mating surfaces before you remove or replace the water pump. After using a new gasket, put the water pump in place and secure it using the mounting bolts tightened to 40 ft. lbs. Make sure the pump's rotation does not touch the timing chain case/cover or the impeller could be damaged. Attach one end of the radiator hose to the water pump and, before putting on the drive belt, release some of the belt tensioner's pressure so the belt runs the water pump in the proper direction. Make sure the top and bottom sections of the fan shroud are firmly attached to the radiator and add the two screws attaching the fan shroud to the radiator. Always make sure there is a minimum clearance of 25 mm (1.0 inches) between the tips of your fan and the shroud. Connect the cooling system, reattach the negative battery cable, turn on the engine, let it run and monitor for any leakage.

Related 2007 Jeep Commander Parts

Alternate Year Models

+
2006 Jeep Commander Water Pump 2008 Jeep Commander Water Pump