Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Jeep Commander Wiper Motor

Windshield Wiper Motor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

  • 2007 Jeep Commander Wiper Motor - 55079105AA
    2007 Jeep Commander Wiper Motor Diagram - 55079105AA
    View related parts

    2007 Jeep Commander Wiper Motor Assembly Part Number: 55079105AA

    Product Specifications
    • Other Name: Module - Windshield; Windshield Wiper Motor; Wiper Motor; Front Motor
    • Replaces: 55156851AB, 55156851AD, 55156851AC, 68020600AA, 55156851AE, 5183007AA
    • Item Weight: 3.20 Pounds
    • Item Dimensions: 40.0 x 10.4 x 8.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 55079105AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Jeep Commander Submodels:
    • 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
  • 2007 Jeep Commander Wiper Motor - 55156325AE
    2007 Jeep Commander Wiper Motor Diagram - 55156325AE
    View related parts

    2007 Jeep Commander Wiper Motor Part Number: 55156325AE

    Product Specifications
    • Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor
    • Replaces: 55156325AC, 55156325AB, 55156325AD
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 55156325AE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2007 Jeep Commander Submodels:
    • 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Jeep Commander Wiper Motor Parts and Q&A

  • Q: How to Properly Position and Secure a Wiper Motor in the Liftgate on 2007 Jeep Commander?
    A: Put the rear wiper motor and mounting bracket into the liftgate and leave the two mounting screws unlocked. Adapt the motor output shaft to the hole in the liftgate outer panel. Then, use the two mounting screws to attach the bracket in the liftgate. Once removed from the liftgate, set the bezel onto the motor output on the outside of the liftgate and secure it in the hole created for it. Connect the nut that ties the bezel and output shaft to the liftgate's outer panel and torque it to 5 Nm (43 in. lbs.) Inside the liftgate, put the two screws into the slots on the motor bracket and tighten them to 6 Nm (50 in. lbs.). Attach the liftgate wire harness cable back into the wiper motor's receptacle. Attach the trim panel onto the liftgate's inner part. Attach the rear wiper arm to the output shaft and then plug the battery negative cable back into the car.

Related 2007 Jeep Commander Parts

Alternate Year Models

+
2006 Jeep Commander Wiper Motor 2008 Jeep Commander Wiper Motor