How to Maintain a Wiper Motor on 2008 Jeep Commander?

Before beginning, make sure to disconnect the battery negative cable. After that, take off the rear wiper arm from the wiper motor's output shaft. After that, loosen and remove the nut connecting the output shaft and the bezel to the outer panel and remove the bezel from the wiper shaft. Once that's done, remove the plastic trim panel from the inner part of the liftgate. Pull the wire harness connector from the rear wiper motor off the liftgate. Remove the two screws that hold the motor mounting bracket to the bracket inside the liftgate and then slide the wiper motor forward until the keyed holes do not secure the mounting screws any longer. Remove the motor from inside the liftgate as your last step.

OEM 2008 Jeep Commander Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2008 Jeep Commander Wiper Motor Assembly Part Number: 68040578AA
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Front Motor; Motor Kit Windshield Wiper; Wiper Motor
- Item Weight: 2.90 Pounds
- Item Dimensions: 10.4 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68040578AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Wiper Motor Part Number: 55156325AE
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor
- Replaces: 55156325AC, 55156325AB, 55156325AD
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55156325AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Jeep Commander Wiper Motor Parts and Q&A

Q: How to Maintain a Wiper Motor on 2008 Jeep Commander?
A: Before beginning, make sure to disconnect the battery negative cable. After that, take off the rear wiper arm from the wiper motor's output shaft. After that, loosen and remove the nut connecting the output shaft and the bezel to the outer panel and remove the bezel from the wiper shaft. Once that's done, remove the plastic trim panel from the inner part of the liftgate. Pull the wire harness connector from the rear wiper motor off the liftgate. Remove the two screws that hold the motor mounting bracket to the bracket inside the liftgate and then slide the wiper motor forward until the keyed holes do not secure the mounting screws any longer. Remove the motor from inside the liftgate as your last step.