How to Install a Sway Bar Kit on an All-Wheel-Drive on 2007 Jeep Compass?

If you have cushion inserts, slide one onto each side of the sway bar kit, with the slits lined up with the bar. If your vehicle is all-wheel-drive, guide the bar under the axle half shafts when you install it. After that, secure the sway bar kit on the crossmember in the rear part of the vehicle. Set the two retainers on the cushions where the mounting holes are and use the retainer screws to keep them in place, but don't tighten them yet. If you have all-wheel-drive, put in the rear driveline module. Align an upper stud from the sway bar link with each end of the sway bar kit on the vehicle, insert it and attach it with a nut by tightening the nut to 58 Nm (43 ft. lbs.), while maintaining stability of the stud. Make sure to make it firm by tightening the cushion retainer screws to 34 Nm (25 ft. lbs.) before removing the car.

OEM 2007 Jeep Compass Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Kits found

View related parts
2007 Jeep Compass Bar - Front Part Number: 5105101AD
$148.30 MSRP: $225.00
You Save: $76.70 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BAR-FRONT
- Position: Front
- Replaces: 5105101AA, 5105101AC, 5105101AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105101AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Compass Submodels:
- 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Jeep Compass Stabilizer Bar, Rear Part Number: 5105887AA
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Item Weight: 3.40 Pounds
- Item Dimensions: 35.7 x 8.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105887AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Compass Submodels:
- Base, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Jeep Compass Stabilizer Bar, Rear Part Number: 5105886AA
Product Specifications
- Other Name: Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Item Weight: 4.00 Pounds
- Item Dimensions: 36.8 x 8.5 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105886AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Compass Submodels:
- Base, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Jeep Compass Sway Bar Kit Parts and Q&A

Q: How to Install a Sway Bar Kit on an All-Wheel-Drive on 2007 Jeep Compass?
A: If you have cushion inserts, slide one onto each side of the sway bar kit, with the slits lined up with the bar. If your vehicle is all-wheel-drive, guide the bar under the axle half shafts when you install it. After that, secure the sway bar kit on the crossmember in the rear part of the vehicle. Set the two retainers on the cushions where the mounting holes are and use the retainer screws to keep them in place, but don't tighten them yet. If you have all-wheel-drive, put in the rear driveline module. Align an upper stud from the sway bar link with each end of the sway bar kit on the vehicle, insert it and attach it with a nut by tightening the nut to 58 Nm (43 ft. lbs.), while maintaining stability of the stud. Make sure to make it firm by tightening the cushion retainer screws to 34 Nm (25 ft. lbs.) before removing the car.