How to Safely Remove a Ball Joint on 2007 Jeep Grand Cherokee?

To start, lift the vehicle, secure the axle and take off the tire and wheel. Following this, take out the ball joint nut from above the knuckle and use special tool #8677 to split the upper ball joint from the knuckle. Pull the knuckle far enough away to give you space for using the ball joint removal tool. Applying extreme pressure material to the threaded areas of the tool will help it work well and last longer both when removed and installed. In the end, apply pressure to the ball joint from the upper control arm with special tools C-4212-F (PRESS) and 9652 (Driver).

OEM 2007 Jeep Grand Cherokee Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
2007 Jeep Grand Cherokee Lower Ball Joint, Front Part Number: 5135651AE
$144.95 MSRP: $219.00
You Save: $74.05 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Balljoint - Lower Control Arm; Suspension Ball Joint, Front Lower; Ball Joint Kit Lower Control Arm; Suspension Ball Joint; Ball Joint
- Position: Front Lower
- Replaces: 5135651AD, 5135651AB, 5135651AC
- Item Weight: 4.10 Pounds
- Item Dimensions: 3.3 x 4.9 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135651AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2007 Jeep Grand Cherokee Ball Joint Parts and Q&A

Q: How to Safely Remove a Ball Joint on 2007 Jeep Grand Cherokee?
A: To start, lift the vehicle, secure the axle and take off the tire and wheel. Following this, take out the ball joint nut from above the knuckle and use special tool #8677 to split the upper ball joint from the knuckle. Pull the knuckle far enough away to give you space for using the ball joint removal tool. Applying extreme pressure material to the threaded areas of the tool will help it work well and last longer both when removed and installed. In the end, apply pressure to the ball joint from the upper control arm with special tools C-4212-F (PRESS) and 9652 (Driver).