How to Maintain and Fix a Steering Knuckle on 2007 Jeep Grand Cherokee?

Lift and stabilize your vehicle and then take off the wheel and tire assembly before working on the steering knuckle. Make sure the caliper is being held by something solid and does not hang off the brake hose. Then, get rid of the brake caliper (1) and caliper adapter (1), remove the O-ring (2) and the disc brake rotor (1). Take out the bolt (2) that connects the sensor to the car, then remove the wires from the retaining clips on the knuckle. With a four-wheel drive car, you need to remove the axle shaft nut. After that, take out the hub/bearing (3) and the outer tie rod end retaining nut and then disconnect the outer tie rod end (3) from the steering knuckle by using special tool 8677(5). Loose the ball joint nut from the lower ball joint and use tool C-4150A (2) to take it out from the knuckle (1). Afterward, remove the upper ball joint nut and extract the upper ball joint from the knuckle with 8677 (1). Last, take out the knuckle (3) from the vehicle.

OEM 2007 Jeep Grand Cherokee Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
2007 Jeep Grand Cherokee Knuckle, Front Passenger Side Part Number: 52090180AD
$482.89 MSRP: $731.00
You Save: $248.11 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Replaces: 52090180AC
- Item Weight: 12.60 Pounds
- Item Dimensions: 24.1 x 11.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52090180AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Jeep Grand Cherokee Knuckle, Front Driver Side Part Number: 52090179AD
$336.90 MSRP: $755.00
You Save: $418.10 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 52090179AC
- Item Weight: 13.20 Pounds
- Item Dimensions: 25.3 x 11.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52090179AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Jeep Grand Cherokee Knuckle, Front Part Number: 5290648AB
Product Specifications
- Other Name: Knuckle - Front; Knuckle Front
- Position: Front
- Replaces: 5290648AA
- Item Weight: 12.80 Pounds
- Item Dimensions: 24.7 x 11.6 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290648AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS
View related parts
2007 Jeep Grand Cherokee Knuckle, Front Driver Side Part Number: 5290649AB
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 5290649AA
- Item Weight: 12.50 Pounds
- Item Dimensions: 25.0 x 11.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290649AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS

2007 Jeep Grand Cherokee Steering Knuckle Parts and Q&A

Q: How to Maintain and Fix a Steering Knuckle on 2007 Jeep Grand Cherokee?
A: Lift and stabilize your vehicle and then take off the wheel and tire assembly before working on the steering knuckle. Make sure the caliper is being held by something solid and does not hang off the brake hose. Then, get rid of the brake caliper (1) and caliper adapter (1), remove the O-ring (2) and the disc brake rotor (1). Take out the bolt (2) that connects the sensor to the car, then remove the wires from the retaining clips on the knuckle. With a four-wheel drive car, you need to remove the axle shaft nut. After that, take out the hub/bearing (3) and the outer tie rod end retaining nut and then disconnect the outer tie rod end (3) from the steering knuckle by using special tool 8677(5). Loose the ball joint nut from the lower ball joint and use tool C-4150A (2) to take it out from the knuckle (1). Afterward, remove the upper ball joint nut and extract the upper ball joint from the knuckle with 8677 (1). Last, take out the knuckle (3) from the vehicle.