How to Service and Repair an Oil Pressure Switch on 2007 Jeep Grand Cherokee?

To fix oil pressure sender, begin by removing the negative battery cable. Raise the vehicle in a hoist and remove the front splash shield. Then, remove the oil pressure sender connector and the sender itself.

OEM 2007 Jeep Grand Cherokee Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2007 Jeep Grand Cherokee Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 75th Anniversary, Laredo, Limited, Overland, Overland Summit, SRT, SRT8, Summit | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2007 Jeep Grand Cherokee Switch - Oil Pressure Part Number: 5149097AB
$58.76 MSRP: $88.10
You Save: $29.34 (34%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149097AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2007 Jeep Grand Cherokee Oil Pressure Switch Parts and Q&A

Q: How to Service and Repair an Oil Pressure Switch on 2007 Jeep Grand Cherokee?
A: To fix oil pressure sender, begin by removing the negative battery cable. Raise the vehicle in a hoist and remove the front splash shield. Then, remove the oil pressure sender connector and the sender itself.