How to service an Oil Pressure Switch on 2006 Jeep Grand Cherokee?

It is important to begin the service by disconnecting the negative battery cable and then raising the vehicle on a hoist. Take off the front splash shield, cut the oil pressure sender connector (4) and take out the sender (2). The first part of installation should be putting in the oil pressure sender and connecting its wire. Put the front splash shield back, lower the vehicle and then reattach the negative battery cable.

OEM 2006 Jeep Grand Cherokee Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2006 Jeep Grand Cherokee Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 75th Anniversary, Laredo, Limited, Overland, Overland Summit, SRT, SRT8, Summit | 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2006 Jeep Grand Cherokee Oil Pressure Sending Unit Part Number: 4868672AA
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Oil Pressure Switch; Switch Oil Pressure
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 1.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4868672AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, Special Edition | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2006 Jeep Grand Cherokee Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2006 Jeep Grand Cherokee?
A: It is important to begin the service by disconnecting the negative battery cable and then raising the vehicle on a hoist. Take off the front splash shield, cut the oil pressure sender connector (4) and take out the sender (2). The first part of installation should be putting in the oil pressure sender and connecting its wire. Put the front splash shield back, lower the vehicle and then reattach the negative battery cable.