How to Service and Repair a Brake Light Switch on 2007 Jeep Wrangler?

Begin by putting the car's battery negative cable away and removing the battery connection to stop the air bag from deploying by chance. To start, take off the steering column opening cover from the instrument panel. Pushing the brake pedal down, turn the brake lamp switch housing counterclockwise until the tabs on the switch locking collar fit into the keyed hole in the brake lamp switch mounting bracket. Get the bracketed switch and move it back as far as it will go to pop it out, then release the brake pedal. At the end, take out the wire harness connector from the brake lamp switch.

OEM 2007 Jeep Wrangler Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2007 Jeep Wrangler Brake Switch Part Number: 4671336AD
$39.68 MSRP: $53.75
You Save: $14.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 4671336, 4671336AC, 4671336AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671336AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
- 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, Rubicon, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.6L V6, 3.8L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2007 Jeep Wrangler Brake Light Switch Parts and Q&A

Q: How to Service and Repair a Brake Light Switch on 2007 Jeep Wrangler?
A: Begin by putting the car's battery negative cable away and removing the battery connection to stop the air bag from deploying by chance. To start, take off the steering column opening cover from the instrument panel. Pushing the brake pedal down, turn the brake lamp switch housing counterclockwise until the tabs on the switch locking collar fit into the keyed hole in the brake lamp switch mounting bracket. Get the bracketed switch and move it back as far as it will go to pop it out, then release the brake pedal. At the end, take out the wire harness connector from the brake lamp switch.