How to Install and Secure an Engine Mount for 2WD and 4WD on 2008 Chrysler Aspen?

Set the front engine mount on your 2WD car by gluing the mount to block using Mopar(R) Lock and Seal Adhesive and the left engine bracket to the bolts that connect to the front axle. Attach the left and right engine mounts to the block bolts, loosely engage them to 54 Nm (40 ft. lbs). After that, fit the through bolts into the engine mounts and put one nut on each bolt, keeping them loose. Place the engine in position using Engine Support 8534, so the through bolts fit into the frame brackets' slots. Tighten the through bolt nuts to 94 Nm (70 ft. lbs.). After removing the negative battery cable, attach the oil drain trough, engine oil filter and make sure to reconnect the battery's negative cable. Also use Mopar(R) Lock and Seal Adhesive on the mount to engine block and left engine bracket to front axle bolts for 4WD. First, fit the engine mount brackets on the engine, then put on the right and left side engine mounts at the front axle and tighten the nuts by 94 Nm (70 ft. lbs.). Hold the front axle up into the frame and bolt the left and right sides at the through holes, then tighten the nuts to 94 Nm (70 ft. lbs.). Put the upper through bolts into the engine mounts and put the nuts on loosely. Use Engine Support 8534 to lower the engine until its brackets rest on the through bolts and the through holes in the lower engine bracket match with the engine mount holes and the left bracket through holes match the front axle slots. Put the bolts for the axle and engine bracket together loosely, as well as the lower through bolts. To 101 Nm (75 ft. lbs.), tighten the through bolt nuts and the ones attaching the front axle to the engine bracket. After that, set up the drain trough, insert the engine oil filter, install the cooling fan and reconnect the negative battery cable.

OEM 2008 Chrysler Aspen Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Mounts found

View related parts
2008 Chrysler Aspen Front Mount, Driver Side Part Number: 52855843AD
$48.54 MSRP: $98.50
You Save: $49.96 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Front Left; Engine Mount Bracket; Motor Mount; Front Insulator; Mount; Insulator Engine Mount
- Position: Front Driver Side
- Replaces: 52855843AB, 52855843AC
- Item Weight: 6.80 Pounds
- Item Dimensions: 6.6 x 4.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855843AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Mount Bracket, Front Part Number: 52021709AB
$16.67 MSRP: $23.95
You Save: $7.28 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket; Engine Mount, Front; Motor Mount; Valve Grind Gasket Kit; Lower Gasket Kit; Front Insulator; Bracket Engine Mount
- Position: Front
- Item Weight: 5.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021709AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Front Mount, Passenger Side Part Number: 52855588AD
$48.72 MSRP: $67.85
You Save: $19.13 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Front Right; Engine Mount Bracket; Motor Mount; Front Insulator; Mount; Insulator Engine Mount
- Position: Front Passenger Side
- Replaces: 52855588AC
- Item Weight: 6.00 Pounds
- Item Dimensions: 7.5 x 4.5 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855588AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Chrysler Aspen Mount Bracket, Passenger Side Part Number: 52021636AB
$23.47 MSRP: $29.75
You Save: $6.28 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front Right, Right; Motor Mount; Front Bracket; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Replaces: 52021636AA
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.3 x 5.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021636AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Mount Bracket, Passenger Side Part Number: 52021638AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front Right, Right; Motor Mount; Front Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021638AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Chrysler Aspen Mount Bracket, Front Driver Side Part Number: 52021639AB
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front Left, Left; Motor Mount; Front Bracket; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Front Driver Side
- Replaces: 52021639AA
- Item Weight: 4.30 Pounds
- Item Dimensions: 6.7 x 5.5 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021639AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Chrysler Aspen Front Mount, Driver Side Part Number: 52855589AD
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Front Left; Engine Mount Bracket; Motor Mount; Front Insulator; Mount; Insulator Engine Mount
- Position: Front Driver Side
- Replaces: 52855589AC
- Item Weight: 7.30 Pounds
- Item Dimensions: 6.6 x 4.7 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855589AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Chrysler Aspen Mount Bracket, Front Driver Side Part Number: 52122775AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front Left, Left; Motor Mount; Front Bracket; Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Front Driver Side
- Replaces: 52021637AB, 52021637AA
- Item Weight: 2.30 Pounds
- Item Dimensions: 24.7 x 15.8 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52122775AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Mount Bracket, Front Part Number: 52021629AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Front, Right; Motor Mount; Engine Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Front
- Item Weight: 3.80 Pounds
- Item Dimensions: 6.0 x 5.3 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021629AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Front Mount, Passenger Side Part Number: 52855540AE
Product Specifications
- Other Name: Insulator - Engine Mount; Front Right Torque Strut; Mount Bracket; Motor Mount; Rear Insulator; Front Insulator; Mount Insulator; Mount; Insulator Engine Mount
- Position: Passenger Side
- Replaces: 52855540AD, 52855540AC
- Item Weight: 5.90 Pounds
- Item Dimensions: 7.3 x 4.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855540AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Front Mount, Driver Side Part Number: 52855539AE
Product Specifications
- Other Name: Insulator - Engine Mount; Front Left Torque Strut Bracket; Motor Mount; Front Insulator; Mount Insulator; Mount; Insulator Engine Mount
- Position: Driver Side
- Replaces: 52855539AC, 52855539AD
- Item Weight: 7.10 Pounds
- Item Dimensions: 6.1 x 5.6 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855539AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Chrysler Aspen Engine Mount Parts and Q&A

Q: How to Install and Secure an Engine Mount for 2WD and 4WD on 2008 Chrysler Aspen?
A: Set the front engine mount on your 2WD car by gluing the mount to block using Mopar(R) Lock and Seal Adhesive and the left engine bracket to the bolts that connect to the front axle. Attach the left and right engine mounts to the block bolts, loosely engage them to 54 Nm (40 ft. lbs). After that, fit the through bolts into the engine mounts and put one nut on each bolt, keeping them loose. Place the engine in position using Engine Support 8534, so the through bolts fit into the frame brackets' slots. Tighten the through bolt nuts to 94 Nm (70 ft. lbs.). After removing the negative battery cable, attach the oil drain trough, engine oil filter and make sure to reconnect the battery's negative cable. Also use Mopar(R) Lock and Seal Adhesive on the mount to engine block and left engine bracket to front axle bolts for 4WD. First, fit the engine mount brackets on the engine, then put on the right and left side engine mounts at the front axle and tighten the nuts by 94 Nm (70 ft. lbs.). Hold the front axle up into the frame and bolt the left and right sides at the through holes, then tighten the nuts to 94 Nm (70 ft. lbs.). Put the upper through bolts into the engine mounts and put the nuts on loosely. Use Engine Support 8534 to lower the engine until its brackets rest on the through bolts and the through holes in the lower engine bracket match with the engine mount holes and the left bracket through holes match the front axle slots. Put the bolts for the axle and engine bracket together loosely, as well as the lower through bolts. To 101 Nm (75 ft. lbs.), tighten the through bolt nuts and the ones attaching the front axle to the engine bracket. After that, set up the drain trough, insert the engine oil filter, install the cooling fan and reconnect the negative battery cable.