How to Remove an Intake Manifold on 2008 Chrysler Aspen?

You must remove the resonator assembly and air inlet hose before unbolting the intake manifold. After that, bleed the fuel system by let out the pressure. Take off the negative lead from the underhood battery and then remove the wiper module. After that, remove the electrical connections from the Electronic Throttle Control (ETC) and the Coolant Temperature (CTS) Sensor. Grasp and pull the spark plug wires out and unplug the generator wires. After that, detach and remove the ignition coils as well as the fasteners holding the manifold. Take out the bolt that fastens the top oil dipstick tube retainer, the ground strap and then the fuel rail. The final step is to take out the intake manifold.

OEM 2008 Chrysler Aspen Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Manifolds found

View related parts
2008 Chrysler Aspen Intake Manifold Part Number: 53034229AA
$758.03 MSRP: $1160.00
You Save: $401.97 (35%)
ADD TO CART
Product Specifications
- Other Name: Plenum - Engine Intake; Engine Intake Manifold; Manifold Engine Intake
- Replaces: 53032761AG, 53032761AJ, 53032761AH, 53032761AI
- Item Weight: 17.30 Pounds
- Item Dimensions: 29.9 x 15.6 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53034229AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Chrysler Aspen Intake Manifold Part Number: 5175896AB
$716.77 MSRP: $1050.00
You Save: $333.23 (32%)
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Package Intake
- Item Weight: 21.40 Pounds
- Item Dimensions: 25.3 x 17.2 x 16.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175896AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 8 Cyl 5.7 L GAS

2008 Chrysler Aspen Intake Manifold Parts and Q&A

Q: How to Remove an Intake Manifold on 2008 Chrysler Aspen?
A: You must remove the resonator assembly and air inlet hose before unbolting the intake manifold. After that, bleed the fuel system by let out the pressure. Take off the negative lead from the underhood battery and then remove the wiper module. After that, remove the electrical connections from the Electronic Throttle Control (ETC) and the Coolant Temperature (CTS) Sensor. Grasp and pull the spark plug wires out and unplug the generator wires. After that, detach and remove the ignition coils as well as the fasteners holding the manifold. Take out the bolt that fastens the top oil dipstick tube retainer, the ground strap and then the fuel rail. The final step is to take out the intake manifold.