How to Install an Intake Manifold and Its Components on 2009 Chrysler Aspen?

Place the gaskets and put the intake manifold in its position to start the installation. After that, mount the ignition coils (1,2) and the manifold retaining bolts, tightening each one from the center bolts using a crisscross pattern to a torque of 12Nm (106 in. lbs.). If you take out the throttle body assembly (3), install it again and the fuel rail. Link the components of the car: MAP Sensor, ETC (2), CTS Sensor, ignition coil and fuel injectors. Put in the top oil dipstick tube retaining bolt, the ground strap and finally the spark plug wires (3). After that, link the generator wires, fit the wiper hub module on the engine and install the resonator and air inlet hose. Put the negatively charged cable onto the negative battery terminal.

OEM 2009 Chrysler Aspen Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Intake Manifolds found

View related parts
2009 Chrysler Aspen Intake Manifold Part Number: 53034229AA
$758.03 MSRP: $1160.00
You Save: $401.97 (35%)
ADD TO CART
Product Specifications
- Other Name: Plenum - Engine Intake; Engine Intake Manifold; Manifold Engine Intake
- Replaces: 53032761AG, 53032761AJ, 53032761AH, 53032761AI
- Item Weight: 17.30 Pounds
- Item Dimensions: 29.9 x 15.6 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53034229AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2009 Chrysler Aspen Intake Manifold Part Number: 68194114AC
$919.44 MSRP: $1340.00
You Save: $420.56 (32%)
Product Specifications
- Other Name: Manifold - Engine Intake; Engine Intake Manifold; Manifold Kit Engine Intake
- Replaces: 68048074AD, 68194114AB, 68194114AA, 68048074AB, 68048074AC
- Item Weight: 28.80 Pounds
- Item Dimensions: 22.6 x 14.6 x 34.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68194114AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Intake Manifold Part Number: 68048131AC
$367.55 MSRP: $537.00
You Save: $169.45 (32%)
Product Specifications
- Other Name: Manifold - Engine Intake; Engine Intake Manifold; Manifold Kit Engine Intake
- Replaces: 68048131AA, 68048131AB
- Item Weight: 21.60 Pounds
- Item Dimensions: 24.1 x 22.7 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68048131AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited Hybrid | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)

2009 Chrysler Aspen Intake Manifold Parts and Q&A

Q: How to Install an Intake Manifold and Its Components on 2009 Chrysler Aspen?
A: Place the gaskets and put the intake manifold in its position to start the installation. After that, mount the ignition coils (1,2) and the manifold retaining bolts, tightening each one from the center bolts using a crisscross pattern to a torque of 12Nm (106 in. lbs.). If you take out the throttle body assembly (3), install it again and the fuel rail. Link the components of the car: MAP Sensor, ETC (2), CTS Sensor, ignition coil and fuel injectors. Put in the top oil dipstick tube retaining bolt, the ground strap and finally the spark plug wires (3). After that, link the generator wires, fit the wiper hub module on the engine and install the resonator and air inlet hose. Put the negatively charged cable onto the negative battery terminal.