How to Install Antenna and Radio Components in the Liftgate on 2008 Chrysler Crossfire?

Start by putting in the liftgate glass before you install your antenna and radio equipment. After that, link the liftgate glass pins (3) to the rear window defogger (1) and the rear window antenna (3). Install the Chmsl assembly to the liftgate (2) and link the Chmsl wire connector afterward. Once done, put in the trim panel for the liftgate. Next, attach the negative battery cable to the device.

OEM 2008 Chrysler Crossfire Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Antennas found

View related parts
2008 Chrysler Crossfire Antenna Mast Part Number: 5104986AA
Product Specifications
- Other Name: Mast - Antenna; Antenna Cable; Mast Antenna
- Item Weight: 0.50 Pounds
- Item Dimensions: 16.3 x 0.6 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104986AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Antenna Base Part Number: 5161959AB
Product Specifications
- Other Name: Base - Antenna; Radio Antenna Mast; Antenna
- Replaces: 5161959AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.6 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5161959AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Antenna Parts and Q&A

Q: How to Install Antenna and Radio Components in the Liftgate on 2008 Chrysler Crossfire?
A: Start by putting in the liftgate glass before you install your antenna and radio equipment. After that, link the liftgate glass pins (3) to the rear window defogger (1) and the rear window antenna (3). Install the Chmsl assembly to the liftgate (2) and link the Chmsl wire connector afterward. Once done, put in the trim panel for the liftgate. Next, attach the negative battery cable to the device.