How to Install a Camshaft Position Sensor on 2008 Chrysler Crossfire?

Inspect the O-ring on your camshaft position sensor for any damage and apply a little engine oil to it if necessary before installation. Fasten the sensor for the camshaft position inside the cylinder head and tighten the retaining bolt with a torque of 8 Nm (71 in. lbs.). After that, link the camshaft position sensor harness connector and lastly attach the negative battery cable again.

OEM 2008 Chrysler Crossfire Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2008 Chrysler Crossfire Camshaft Position Sensor Part Number: 68102591AA
$164.29 MSRP: $242.00
You Save: $77.71 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Replaced by: 68430062AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 4.1 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68102591AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2008 Chrysler Crossfire Camshaft Sensor Part Number: 68430062AA
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Position Sensor; Cam Sensor
- Replaces: 5137706AA, 68102591AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68430062AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2008 Chrysler Crossfire Camshaft Position Sensor Parts and Q&A

Q: How to Install a Camshaft Position Sensor on 2008 Chrysler Crossfire?
A: Inspect the O-ring on your camshaft position sensor for any damage and apply a little engine oil to it if necessary before installation. Fasten the sensor for the camshaft position inside the cylinder head and tighten the retaining bolt with a torque of 8 Nm (71 in. lbs.). After that, link the camshaft position sensor harness connector and lastly attach the negative battery cable again.