How to Service and Repair a Rear Crossmember Bushing on 2008 Chrysler Pacifica?

First, support and raise the vehicle to reach the back cross-member bushing. Get to the rear spring on the side of your car that is being repaired and then disassemble it. After that, undo the bolt and nut securing the spring link onto the crossmember. Put the spring link below the bushing on the crossmember. Build the tools above the bushing, taking care that the Receiver, Special Tool 9032-1, is placed on the crossmember and not on the welds. Screw the press screw-drive tight until the bushing is pushed out of the crossmember.

OEM 2008 Chrysler Pacifica Crossmember Bushing

Crossmember Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crossmember Bushings found

View related parts
2008 Chrysler Pacifica Crossmember Bushing, Front Part Number: 4766744AA
$79.67 MSRP: $121.00
You Save: $41.33 (35%)
ADD TO CART
Product Specifications
- Other Name: Isolator - Crossmember; Suspension Crossmember Insulator, Front; Isolator; Isolator Crossmember
- Position: Front
- Item Weight: 2.20 Pounds
- Item Dimensions: 3.9 x 3.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4766744AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Isolator, Lower Part Number: 4743434AB
Product Specifications
- Other Name: Insulator - Crossmember; Engine Cradle Insulator, Lower; Coil Spring Insulator; Isolator Crossmember Lower; Isolator Crossmember; Isolator Cradle
- Position: Lower
- Item Weight: 1.20 Pounds
- Item Dimensions: 7.2 x 5.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4743434AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Crossmember Bushing, Rear Part Number: 4766746AA
Product Specifications
- Other Name: Isolator - Crossmember; Suspension Crossmember Insulator, Rear; Isolator; Isolator Crossmember
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.7 x 3.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4766746AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Crossmember Bushing Parts and Q&A

Q: How to Service and Repair a Rear Crossmember Bushing on 2008 Chrysler Pacifica?
A: First, support and raise the vehicle to reach the back cross-member bushing. Get to the rear spring on the side of your car that is being repaired and then disassemble it. After that, undo the bolt and nut securing the spring link onto the crossmember. Put the spring link below the bushing on the crossmember. Build the tools above the bushing, taking care that the Receiver, Special Tool 9032-1, is placed on the crossmember and not on the welds. Screw the press screw-drive tight until the bushing is pushed out of the crossmember.