How to Install the Cruise Control Switch on 2008 Chrysler Pacifica?

Attach the electrical connector to the cruise control switch first. Following this, install the switch and fix it to the steering wheel firmly with the right screw. Then, install the air bag on the driver's side and do so according to the air bag manual instructions. Following that, attach the negative battery cable and tighten the nut until it reaches 5 Nm (45 in. lbs.).

OEM 2008 Chrysler Pacifica Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Cruise Control Switches found

View related parts
2008 Chrysler Pacifica Cruise Switch, Passenger Side Part Number: UB54XDVAD
$45.00 MSRP: $73.75
You Save: $28.75 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Right; Switch
- Position: Passenger Side
- Replaces: UB54XDVAC
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UB54XDVAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Cruise Switch, Driver Side Part Number: UB55XDVAD
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch, Left; Switch
- Position: Driver Side
- Replaces: UB55XDVAC
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.4 x 4.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UB55XDVAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Cruise Control Switch Parts and Q&A

Q: How to Install the Cruise Control Switch on 2008 Chrysler Pacifica?
A: Attach the electrical connector to the cruise control switch first. Following this, install the switch and fix it to the steering wheel firmly with the right screw. Then, install the air bag on the driver's side and do so according to the air bag manual instructions. Following that, attach the negative battery cable and tighten the nut until it reaches 5 Nm (45 in. lbs.).