How to Service a Camshaft Position Sensor on a 3.8L Engine on 2008 Chrysler Pacifica?

For any 3.8L engine, always disconnect and isolate the negative cable at the battery before servicing the Camshaft Position Sensor. After that, remove the connectors from the camshaft position (CMP) sensor. Loose the mounting bolt for the CMP sensor, then remove the sensor leaving the bolt where it is. The CMP sensor has now been taken out.

OEM 2008 Chrysler Pacifica Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2008 Chrysler Pacifica Camshaft Position Sensor Part Number: 5149078AD
$163.52 MSRP: $226.00
You Save: $62.48 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Cam Sensor; Sensor Camshaft
- Replaces: 5149078AB, 5149078AA, 5149078AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149078AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- LX | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2008 Chrysler Pacifica Crankshaft Position Sensor Part Number: 5029808AD
Product Specifications
- Other Name: Engine Camshaft Position Sensor; Camshaft Position Sensor; Sensor Camshaft
- Replaces: 68013184AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 2.0 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5029808AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Camshaft Position Sensor Parts and Q&A

Q: How to Service a Camshaft Position Sensor on a 3.8L Engine on 2008 Chrysler Pacifica?
A: For any 3.8L engine, always disconnect and isolate the negative cable at the battery before servicing the Camshaft Position Sensor. After that, remove the connectors from the camshaft position (CMP) sensor. Loose the mounting bolt for the CMP sensor, then remove the sensor leaving the bolt where it is. The CMP sensor has now been taken out.