OEM 2008 Chrysler Pacifica Lash Adjuster

2008 Chrysler Pacifica Lash Adjuster Parts and Q&A

• Q: How to Install a Lash Adjuster and Ensure Proper Lubrication on 2008 Chrysler Pacifica?

  A: Before installing the lifters, first oil them with engine oil and place them so their hole is pointing upward. Then, fit the hydraulic lifters into the cylinders, making certain the lubrication hole is pointed upward towards the block's middle and use the same location they were originally at if being reused. Set up the yokes in position and then attach the yoke retainer, securing the screws to 12 Nm (105 in. lbs.). After that, position and install the cylinder heads. After all components are in position, turn on the engine and let it reach its normal temperature while running. Don't allow the engine to idle above fast idle until all the hydraulic lifters are filled with oil and their noise has stopped or you may end up harming the valve mechanism.