How to Install a Window Regulator for the Front Door on 2008 Chrysler Pacifica?

Start by inserting the window regulator through the hole at the back and put it on the inner portion of the door where it goes. Once the screw heads match up on the guide rails with the keyhole slots in the inner door panel, tighten the screws to join the front and rear guide rails to a torque of 9 Nm (80 in. lbs.) Following that, tighten all the screws to hold both the housing and motor in place on the inner door panel to 9 Nm (80 in. lbs.), then secure the motor/housing wire connector. Following this, fix the door glass and test it to confirm the position and efficiency. Now you should apply the inner belt molding and watershield, then fit the door trim panel.

OEM 2008 Chrysler Pacifica Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Window Regulators found

View related parts
2008 Chrysler Pacifica Window Regulator, Front Driver Side Part Number: 5020787AE
$144.64 MSRP: $245.00
You Save: $100.36 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left; Regulator; Regulator Front Door Window
- Position: Front Driver Side
- Replaces: 5020787AD
- Item Weight: 6.10 Pounds
- Item Dimensions: 21.4 x 21.9 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5020787AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Window Regulator, Rear Part Number: 5020791AA
$178.83 MSRP: $285.00
You Save: $106.17 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Power Window Motor; Window Motor; Motor; Regulator; Regulator Rear Door Window
- Position: Rear
- Item Weight: 4.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5020791AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Window Regulator, Rear Part Number: 5020790AA
$234.33 MSRP: $342.00
You Save: $107.67 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Power Window Motor; Window Motor; Motor; Regulator; Regulator Rear Door Window
- Position: Rear
- Item Weight: 4.30 Pounds
- Item Dimensions: 26.4 x 15.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5020790AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Window Regulator, Front Passenger Side Part Number: 5020786AE
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right; Regulator; Regulator Front Door Window
- Position: Front Passenger Side
- Replaces: 5020786AD
- Item Weight: 10.90 Pounds
- Item Dimensions: 25.2 x 24.2 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5020786AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Window Regulator Parts and Q&A

Q: How to Install a Window Regulator for the Front Door on 2008 Chrysler Pacifica?
A: Start by inserting the window regulator through the hole at the back and put it on the inner portion of the door where it goes. Once the screw heads match up on the guide rails with the keyhole slots in the inner door panel, tighten the screws to join the front and rear guide rails to a torque of 9 Nm (80 in. lbs.) Following that, tighten all the screws to hold both the housing and motor in place on the inner door panel to 9 Nm (80 in. lbs.), then secure the motor/housing wire connector. Following this, fix the door glass and test it to confirm the position and efficiency. Now you should apply the inner belt molding and watershield, then fit the door trim panel.