Other Name: Hinge - Rear Door; Door Hinge, Rear Left Lower, Rear Right Upper; Upper Hinge; Hinge Rear Door; Door Hinge
Position: Rear Lower Driver Side
Item Weight: 1.70 Pounds
Item Dimensions: 4.1 x 4.3 x 2.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5103344AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
2008 Chrysler Pacifica Door Hinge Parts and Q&A
Q: How to Replace a Rear Door Hinge on 2008 Chrysler Pacifica?
A: Open the rear door by releasing the latch and then you can remove the old hinge. Use a pen or marker to top each hinge at the pillar and door point. Following this, get rid of the trim on the B-pillar which makes it easier to remove the inside and outside bolts. Use an appropriate device to support the door, then remove the bolts attaching the door hinge to the B-pillar and the bolts that hold the rear door to the hinge. In the end, take out the door hinge from your car.