How to Install a Rear Door Latch Assembly on 2008 Chrysler Pacifica?

When installing the rear door latch, take out the screws securing the latch to the door end frame, because they have nylon patches that need to be replaced. Bring in the middle handle latch link and adjust the clip until it is pressed against the door latch. On the door end frame, set up the door latch and install every screw, tightening them to a torque of 8 Nm (75 in. lbs.). After that, add the remaining linkages to the door latch and connect the clips. If you have the wire connector, join it to the power door lock motor. Adjust the door's latch as instructed and make certain the door lock and power door lock are working as they are supposed to. Then, put the watershield and the rear door trim panel into place.

OEM 2008 Chrysler Pacifica Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Door Latch Assemblys found

View related parts
2008 Chrysler Pacifica Lock, Front Passenger Side Part Number: 4894266AH
$76.48 MSRP: $113.00
You Save: $36.52 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Right; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Front Door; Door Latch Assembly
- Position: Front Passenger Side
- Item Weight: 2.70 Pounds
- Item Dimensions: 15.6 x 14.9 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4894266AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Lock, Front Driver Side Part Number: 4894267AH
$81.24 MSRP: $120.00
You Save: $38.76 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Left; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Front Door; Door Latch Assembly
- Position: Front Driver Side
- Item Weight: 2.90 Pounds
- Item Dimensions: 15.3 x 14.8 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4894267AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Lock, Rear Driver Side Part Number: 5054439AB
Product Specifications
- Other Name: Latch - Rear Door; Rear Left Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Rear Driver Side
- Replaces: 5054439AA
- Item Weight: 4.70 Pounds
- Item Dimensions: 12.9 x 12.4 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5054439AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Lock, Rear Passenger Side Part Number: 5054438AB
Product Specifications
- Other Name: Latch - Rear Door; Rear Right Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Rear Passenger Side
- Replaces: 5054438AA
- Item Weight: 2.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5054438AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Door Latch Assembly Parts and Q&A

Q: How to Install a Rear Door Latch Assembly on 2008 Chrysler Pacifica?
A: When installing the rear door latch, take out the screws securing the latch to the door end frame, because they have nylon patches that need to be replaced. Bring in the middle handle latch link and adjust the clip until it is pressed against the door latch. On the door end frame, set up the door latch and install every screw, tightening them to a torque of 8 Nm (75 in. lbs.). After that, add the remaining linkages to the door latch and connect the clips. If you have the wire connector, join it to the power door lock motor. Adjust the door's latch as instructed and make certain the door lock and power door lock are working as they are supposed to. Then, put the watershield and the rear door trim panel into place.