How to Safely Install a Cruise Control Switch and Airbag Module on 2008 Chrysler PT Cruiser?

You'll find the speed control switch in the steering wheel and it's connected to the clock spring device found under the air bag module. Be careful with the restraint systems if you must remove the air bag module. At first, plug in the electrical connector, put in the switch and secure it with screws tightened to 1.6 Nm (15 in. lbs.), checking the rubber seal is positioned correctly around the switch. Install the air bag next, reconnect the negative battery cable, put on the air cleaner lid and link both the inlet air temperature sensor and the makeup air hose.

OEM 2008 Chrysler PT Cruiser Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Switch found

View related parts
2008 Chrysler PT Cruiser Cruise Switch Part Number: 4671929AC
$64.06 MSRP: $95.75
You Save: $31.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Speed Control; Cruise Control Switch; Engagement Switch; Switch; Switch Speed Control
- Replaces: 4671929AB, 4671929AA, 4671929AE, 68057091AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 3.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671929AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2008 Chrysler PT Cruiser Cruise Control Switch Parts and Q&A

Q: How to Safely Install a Cruise Control Switch and Airbag Module on 2008 Chrysler PT Cruiser?
A: You'll find the speed control switch in the steering wheel and it's connected to the clock spring device found under the air bag module. Be careful with the restraint systems if you must remove the air bag module. At first, plug in the electrical connector, put in the switch and secure it with screws tightened to 1.6 Nm (15 in. lbs.), checking the rubber seal is positioned correctly around the switch. Install the air bag next, reconnect the negative battery cable, put on the air cleaner lid and link both the inlet air temperature sensor and the makeup air hose.